INTRA UZ

System with subframe

Technique

The wall-flush INTRA UZ door forms a flush unit of door, frame and wall by using the bottom frame and shadow gap. Depending on the installation situation, a distinction is made between the variant with aluminium profile (UZ-ALU) suitable for plastering and without (installation in plastered reveal).

Design Option

With the UZ-ALU version, the aluminium profile can be powder-coated in the colour of your choice. There is also a choice of inverted opening variants and functional versions.

References

Architect's house Stuttgart
Spacious city flat Offenbach

Main features

Door, door frame and wall flush
Variants with and without aluminum profile
Subframe made of water-resistant material can be pre-assembled
High-quality, made-to-measure door leaf
Wide range of available surfaces

Your advantages

Individual, wall flush door with subframe.

Downloads

Catalog of internal doors
Data sheet INTRA UZ

Options

Door leaf

High-quality door leaf construction

Door leaf flush with frame
Door leaf thickness depending on frame system 40/48/64 mm
3-sided concealed solid wood edge banding
Highly compressed stabilizers (4-sided) against deformation
Slightly rounded edges (solid)
Solid chipboard insert
Silky, velvety matt sanded lacquer finish (approx. 250 g/m² lacquer application)
Real wood veneers with matt clear lacquer surface and choice selection of wood

2 elements

Frame systems

Flush-to-wall frame systems INTRA UZ

2-shell frame system with subframe, ready for installation, glued (no mitre joint thanks to subsequent painting)
UZ-ALU variant with aluminium plaster profile
Subframe can be powder-coated in various colours
Lining panel made of high-quality blockboard (22 mm)
Moisture barrier on the rear
Cladding edges slightly rounded, moulded

A complete overview of our models and surfaces is available on request.

10 elements

INTRA IN-UZ-ALU-DF 2F (Sound protection)

Door fittings

High-quality fittings

Concealed hinges (Tectus, available in various finishes and colours)
BB lock (class 3) with whisper latch, stainless steel faceplate, 55 mm backset
Sturdy 3 mm strike plate (stainless steel)

Optional

Magnetic lock for quiet closing comfort
Integrated overhead door closer (recommended for doors that open inwards)
Floor seal for increased sound insulation

5 elements

integrated door closer / opening limiter

Functional versions

Multifunctional doors

The right door solution for every requirement.
As your project partner, ComTür develops a comprehensive door concept that is individually tailored to your needs. Using a modular principle, we equip each door with exactly the functions your project requires.

Combinations:

6 elements

Door leaf design

Door leaf variations

12 elements

Light cut-out versions

Design variants for the light cut-outs

For the individual design of your glazing cut-out, we offer the following options. Three glass holder profiles are available:

TA30 - flush CT-Standard
F29 - profiled surface-mounted
F40 - modern surface-mounted

9 elements

Side panels & fanlights

Custom add-on elements

Discover our wide range of side panels and fanlights and find the optimal solution for your structural situation.

Side panel in glass or door leaf design
Fanlight
Top panel or lintel panel

11 elements

Fanlights with side panels on both sides

Top panel and side panel in door leaf design

VARIA-PROTECT variants

Varia-PROTECT

With the aluminium protective edge running around three sides, a wide variety of materials can be placed on the door leaf, including glass, mirrors, leather and much more. This version works with door leaf thicknesses of 40/48 and 64 mm. On request, the aluminium protective edge can be powder-coated in RAL colours to match the surface material.

6 elements

Aluminium protective edge with lacquered glass cover

Aluminium protective edge Wooden surface

Door leaf covered with original floorboards

CT-Natural wood finish

Real wood veneer

Nature offers a huge variety that leaves nothing to be desired. The surface treatment of our veneered doors is carried out with a high-quality, completely natural-looking, matt finish or oil.

Depending on your requirements and interior design concept, the surface of the real wood doors can also be brushed and/or stained. It is also possible to cover the door leaf with original reclaimed wood. In principle, we can adjust any surface for you according to a sample template.

Note: With some surfaces (e.g. Makassar), there are significant variations in colour and structure depending on the veneer trunk. These unique surfaces are sampled with the original trunk when the order is placed.

VIDEO: Veneer pattern based on template

10 elements

Eiche Altholzcharakter gebürstet, geölt (F8)

CT-Sanded lacquer surface

High-quality sanded lacquer finish

Our high-quality, velvety-silky, matt sanded lacquer finish in furniture quality is ComTür's speciality and an absolute mark of quality for our real wood doors. The sanded lacquer finish surfaces are available in all colours, e.g. according to RAL, Farrow & Ball, PANTONE or other colour charts. Our sanded lacquer finish is also available in high gloss.

VIDEO: ComTür speciality ‘High-quality sanded lacquer finish’ VIDEO

6 elements

CT-High-gloss finish

High-gloss finish

The basis for our high-gloss doors is a hand-sprayed, multi-layer paint structure with manual intermediate sanding for a single-layer, high-gloss finish. All colours, e.g. according to RAL, Farrow & Ball, PANTONE, are possible. ComTür distinguishes between high-gloss and high-gloss mirror-polished surfaces.

4 elements

Collection oak RAL lacquered

Oak collection, RAL lacquered

The new surface trend, not only for kitchens. Beautiful oak veneer is coated with high-quality sanding lacquer in RAL colours.

The real wood door is particularly beautifully finished, especially in dark colours. Various colours are available. For all colours, the veneer is brushed before lacquering to enhance the effect.

6 elements

Detail Style door Brushed oak Deep black

Detail Sliding door Brushed oak Traffic white

Handles

Innentür-Griffe alt

Der Griff definiert nicht nur maßgeblich das Erscheinungsbild Ihrer Innentür, sondern Sie geben ihm auch tagtäglich die Hand. Bei Ihrer Auswahl wählen Sie aus einer Vielfalt von Designvarianten (rund, oval oder eckig), Ausführungen (aufgesetzt oder flächenbündig, mit oder ohne Schlüssellochbohrung) und Oberflächen (Edelstahl matt oder poliert, Schwarz, Bronze, etc.). In unserem Standardprogramm finden Sie nur Griffe von Qualitätslieferanten der Klasse 4.

Unsere Fertigung nach Maß ermöglicht Ihnen grundsätzliche Gestaltungsfreiheit bei der Griffauswahl. Sprechen Sie uns einfach an. Nachfolgend finden Sie eine kleine Auswahl an möglichen Griffen. Eine komplette Übersicht erhalten Sie auf Anfrage.

NEU: Integrierte Griffmodule in verschiedenen Längen und Oberflächen (definieren sich über das Türblatt).

12 elements